# What is the difference between a 4 pole and 6 pole motor?

Contents

## Which is better 4 pole or 6 pole motor?

Given all else is equal then the 6 pole will develope more torque but less power than the 4 pole , the magnets must be smaller in the 6 pole so less powerful but as there are more it’s smoother and gives more torque .

## What is a 6 pole motor?

The pole count of a motor is the number of permanent magnetic poles, north and south, on the rotor. There is always the same number of north and south poles on the rotor. For example, in a 12 pole motor, there are 6 north poles and 6 south poles. This motor would also be considered a 6 pole-pair motor.

## What speed is a 6 pole motor?

Six-pole motors run at 1,200 rpm unloaded (7,200 Ã· 6) and between 1,050 and 1,175 rpm loaded.

## How many RPM is a 4 pole motor?

Two pole AC motors operating at 60 Hz will always run at approximately 3600 rpm, and four pole AC motors will have speeds around 1800 rpm. Example 120 x 60 hertz / 4 poles = 1,800 rpm.

THIS IS USEFUL:  Question: Should my engine be hot to the touch?

## Is my motor 2 pole or 4 pole?

What is the difference between 2-Pole Motor and 4-Pole Motor? 2 pole motor has two poles (or a single pair of magnetic poles) while 4 pole motors have four magnetic poles in alternating order. 2 pole motors have twice the speed of a 4 pole motor.

## How many coils does a 6 pole motor have?

To create a six pole motor use six coils per phase that creates three north poles and three south poles and so on. The number of stator slots is always a multiple of six.

## Can a 60Hz motor run on 50Hz?

For a generic answer: yes you can, IF: you reduce the voltage by 50/60, the equipment doesn’t care, you don’t care about potentially overheating the motor, the process/load can tolerate the lower speed/torque, etc.

## What is a 5 pole motor?

There are in fact three separate coils (on a three-pole motor) or five separate coils (on a five-pole motor). When you turn your controller on, power is distributed to the sections of the coiled wire creating an electromagnet.

## What is the approximate motor speed of a 6 pole motor running at 60hz?

At 60 Hz, a motor with six poles would run at 1,200 RPM under no load and at approximately 1,175 RPM loaded. A motor with eight poles would run at 900 RPM unloaded and at about 800 RPM under load.

## What is the synchronous speed of a 4 pole motor operating at 50 Hz?

A four-pole motor will only rotate at 1,800 rpm. For 50 Hz motors, the speed is 3,000 rpm with 2 poles, and 1,500 rpm with 4 poles.

THIS IS USEFUL:  Can you use fabric freshener on car seats?

## Which is the fastest DC motor?

The British appliance manufacturer Dyson claims to have developed the world’s fastest, most efficient motor for domestic appliances. The Dyson Digital Motor (DDM) v2 is a single-phase brushless DC motor, which operates at speeds up to 104,000 rpm with a claimed efficiency of 84%.

## How do you make an electric motor go faster?

How To Make An Electric Motor Spin Faster?

1. increasing the size of the current;
2. using a stronger magnet;
3. increasing the number of turns of wire in the coil;
4. reducing friction between the coil and the axel it rotates on.

## Which DC motor has the highest torque?

The torque of the DC series motor is proportional to the square of the armature current. That is why the DC series motor has high starting torque. The DC series motor produces the highest torque among all kinds of motors.